The fueling nozzle has a sensing device that can sense the fuel situation, and it will automatically jump when the fuel tank is full to prevent fuel overflow. The inlet of the fuel tank is relatively curved and narrow. If the pressure of the fuel gun is too high, the oil output will be too large, and it will easily spill out when refueling, causing the gun to jump. In addition, after the fuel gun factory pulls the trigger, it will automatically press. If the buckle is not firm after a long time of use, it is necessary to pinch it several times to tighten the buckle.
Drive the car to the fuel dispenser with the specified fuel number, then stop and turn off the engine and turn off the power. Select the corresponding payment method, insert the card into the card slot with the gas card, select the corresponding gas method, fixed amount or fixed amount of fuel, or fill up the fuel tank. After inputting the corresponding refueling value, you can take out the oil gun from the oil dispenser and insert it into the fuel tank port. After pulling the trigger, you can refuel. After pulling the trigger, you don't need to hold it down all the time. The oil gun will automatically press.