You run a busy fleet garage. Space is tight. Bays are packed. Every inch counts. You need a fuel dispenser that fits without stealing room from your service bays. But you also need it to handle volume, deliver accuracy, and keep your fleet moving.
This is exactly why Eaglestar built the Eaglestar EGX1 Industrial Pump for Fleet & Garge.
Standing at just 1350mm or 1550mm tall, it slides into low-clearance garages and compact sites where full-size fuell pumps cannot go. Yet inside that compact frame, you get industrial-grade performance: ±0.1% metering accuracy, multi-fuel compatibility, and optional payment integration. It is a mini fuel dispenser with max capabilities.
Let us walk you through what makes this Eaglestar EGX1 Industrial Pump for Fleet & Garge different.
How Low Height Changes Your Garage Layout
Standard fuel dispensers often require high housing. Not every garage has them. If your building has low beams or mezzanine storage above, a tall fuel pump simply will not fit.
The Eaglestar EGX1 Industrial Pump for Fleet & Garge measures 1350mm in its standard configuration. For applications needing even more flexibility, the Eaglestar 1550mm model provides additional clearance for larger vehicles while still fitting under most overhead obstructions. You mount it where you need it, not where the ceiling allows.
This compact footprint frees up floor space. You position it closer to service bays. You reduce the distance drivers walk. Your operation flows better because the equipment adapts to your building, not the other way around.
What ±0.1% Accuracy Does for Your Fuel Management
Fuel is your largest variable cost. Every gallon dispensed needs to be accounted for. The Eaglestar EGX1 Industrial Pump for Fleet & Garge features a high-precision flow meter certified to OIML R117 standards with accuracy of ±0.1%.
Over a year of dispensing thousands of gallons, that precision translates into real savings. You catch discrepancies early. You reconcile deliveries accurately. Your inventory records match actual usage. For fleet operations, this means better cost control and fewer surprises at the end of the month.
One Pump, Multiple Fuels: Gasoline, Diesel, Ethanol, DEF
Your fleet likely runs on different fuels. Trucks take diesel. Some vehicles use E85. Off-road equipment may need ethanol blends. Maybe you also dispense Diesel Exhaust Fluid.
The Eaglestar EGX1 Industrial Pump for Fleet & Garge handles all of them. Its vane pump technology delivers 5 to 7 liters per minute with low pulsation and minimal noise. The materials are compatible with ethanol blends up to E85 and with DEF, which is notoriously corrosive to standard components. You do not need separate pumps for different fuels. One machine serves your entire fleet.
Safety Built In: Leak Detection, Explosion Proof, Vapor Recovery
Fuel dispensing carries inherent risks. The Eaglestar EGX1 Industrial Pump for Fleet & Garge addresses them directly.
The integrated leak detection system continuously monitors hoses and valves. If a leak develops, you receive an alert immediately. This meets API RP 1004 requirements and gives you peace of mind during every fueling event.
All electrical components carry ATEX and IECEx certification for hazardous zones. The housing contains any potential ignition source. You operate safely in environments where fuel vapors are present.
For locations requiring emission control, the optional Stage II vapor recovery system captures vapors during refueling. You meet environmental regulations while keeping your site clean.
Maintenance Made Simple: Modular Design with Self-Diagnostics
Downtime kills productivity. When a pump goes down, your fleet queues up. The Eaglestar EGX1 Industrial Pump for Fleet & Garge minimizes downtime through two design choices.
First, the modular construction. Pumps, valves, and electronics are all accessible without disassembling the entire unit. A technician replaces a faulty component in minutes, not hours.
Second, the self-diagnostic system. The dispenser continuously monitors its own health. If a filter clogs, if a pump fault develops, if a sensor reads incorrectly, you get an alert before the problem stops fueling. You schedule maintenance proactively, not reactively.
Customizable to Your Operation: Dual Hoses, Aviation, Branding, RFID
No two fleets are identical. Your fueling needs are unique. The Eaglestar EGX1 Industrial Pump for Fleet & Garge platform reflects this reality.
- Dual hose configuration: Fuel two vehicles simultaneously. Cut wait times in half during peak hours.
- Aviation and marine variants: Ruggedized models for Jet A-1, avgas, and marine diesel. Corrosion-resistant materials and hazardous-location certifications included.
- Branding kits: Custom colors and logos applied with industrial-grade powder coat. Your brand identity extends to the pump.
- RFID integration: Connect with fleet management systems. Restrict access to authorized vehicles. Track fuel usage by driver or vehicle automatically.
You configure the pump with only the features you need. No extra cost for capabilities you will never use. No compromise on the functions that matter to your operation.
Summary: What You Get with the Eaglestar EGX1 Industrial Pump for Fleet & Garge
- Compact dimensions (1350mm or 1550mm) that fit low-clearance garages and skid-mounted stations
- ±0.1% metering accuracy certified to OIML R117
- Multi-fuel compatibility with gasoline, diesel, ethanol blends, and DEF
- 5-7 L/min flow rate from low-pulse vane pump technology
- Integrated leak detection meeting API RP 1004
- ATEX/IECEx explosion-proof certification for hazardous zones
- Optional Stage II vapor recovery for emission control
- Stainless steel IP54 cabinet for weather and dust resistance
- Modular design with easy access to all components
- Self-diagnostics for proactive maintenance alerts
- Customizable options: dual hoses, aviation/marine variants, branding kits, RFID integration
- Suitable for skid-mounted stations and mini gas stations